Oil and Gas Jobs
"Lead Seismic Quality Control Rep"
Hours a week : 70
Closing Date : 22 January 2016
Thursday, October 8, 2015
Oil and Gas Jobs
"Commisioning Manager"
Type : Contract
Closing Date : 12/30/2015
Responsibilities
Leads, directs and supervises a team of discipline Engineers in preparation and execution of commissioning of process plants assuming entire responsibility for the completion of the implementation in conformance with the client’s needs and HSE standards.
"Commisioning Manager"
Type : Contract
Closing Date : 12/30/2015
Responsibilities
Leads, directs and supervises a team of discipline Engineers in preparation and execution of commissioning of process plants assuming entire responsibility for the completion of the implementation in conformance with the client’s needs and HSE standards.
Oil and Gas Job
"Electrician"
Closing Date : 15/10/2015
Responsibilities
The Electrician will report to the appointed supervisor of maintenance and will be responsible for performing maintenance, installation and repair of all electrical equipment onboard drilling vessel.
"Electrician"
Closing Date : 15/10/2015
Responsibilities
The Electrician will report to the appointed supervisor of maintenance and will be responsible for performing maintenance, installation and repair of all electrical equipment onboard drilling vessel.
Monday, October 5, 2015
Wednesday, September 23, 2015
Monday, August 24, 2015
Monday, February 9, 2015
Carrier
Cabot 750 Drilling Rig, Carrier Mounted 3X2 Tandem Axles
is powered by (2) rebuilt Caterpillar 3406 Engines (0 hour rebuild)
and Allison 750 auto transmission (two C700 rebuild transmissions).
Front and rear ends rebuilt by truck part specialist. 112’ Mast,
300,000# capacity complete with racking board, all raising lines and
guidelines. Drawworks, hydromatic break, and crown assembly
also rebuilt.
also rebuilt.
Friday, February 6, 2015
Sunday, February 1, 2015
Main Specifications
Model TZJ 30/1700
Drilling Depth 5" pipe 8,000 ft, 4-1/2" pipe 10,000 ft
Max hook load 396,800#
Power (2) 525 hp 2100 rpm
Mast height 125 ft
Traveling system 6 x 5
Effective lines 10
Diameter of the drilling line 1-1/4"
Hoisting speed of hook 0.2-1.2 m/s
Table diameter 27 1/2"
Height of substructure 19.7 ft
Ambient temperature -20C to +50C
Engine : Detroit 60 series 525 hp
Model TZJ 30/1700
Drilling Depth 5" pipe 8,000 ft, 4-1/2" pipe 10,000 ft
Max hook load 396,800#
Power (2) 525 hp 2100 rpm
Mast height 125 ft
Traveling system 6 x 5
Effective lines 10
Diameter of the drilling line 1-1/4"
Hoisting speed of hook 0.2-1.2 m/s
Table diameter 27 1/2"
Height of substructure 19.7 ft
Ambient temperature -20C to +50C
Engine : Detroit 60 series 525 hp
Description
I-Drawworks
- RG Model JC28E, max speed 450 rpm – API spec 7K
- Rated @ 1300 HP
- Fast line pull 62,107 lbs
- Diameter : 40 inch x 25 inches
- ATD 330H axial thrust disc clutch (New from WPT 2 qtr. 2013)
- Drawworks fitted with disc brakes – 14,330 lbs positive pressure per rim
- Disc brakes have separate hydraulic system
- Eaton Model 324 auxiliary brake – water cool – separate tankage
(Function tested by TCM – Offshore 2nd qtr. 2013)
- 7,500 ft 1-1/4” drill line 6 x 19 EIPS IWRC RPL
- Crown-O-Matic toggle valve crown saver
II - Trailer
- Model ES 9660 with Mast Crown and Standpipe
- (5) axle, triple steel board, balanced suspension. (2) Air lift (3) Spring,
12 x 20 double tires
- OAL 50’ L x 10’10” W x 14’ H with mast on
- Back overhang 5’4”
- Axle spacing 4’6”
- (5) x 26,000 lbs. axles
III - Substructure- Model ZZ225 rated at 500,000 lbs – pull test 580K
- Floor height – 19’ 8-1/2” (scoped up)
- 11’6” W x 30’ L x 10’3”H (scoped down)
- Under rotary 17’ 6”
- Clear area under beams – 15.7 feet
- Mechanical raise with adjustments for uneven locations
- Floor – 24 feet x 20 feet complete with 2 walkways, and trailer
walkway ladder. All built new 2 qtr. 2013
I-Drawworks
- RG Model JC28E, max speed 450 rpm – API spec 7K
- Rated @ 1300 HP
- Fast line pull 62,107 lbs
- Diameter : 40 inch x 25 inches
- ATD 330H axial thrust disc clutch (New from WPT 2 qtr. 2013)
- Drawworks fitted with disc brakes – 14,330 lbs positive pressure per rim
- Disc brakes have separate hydraulic system
- Eaton Model 324 auxiliary brake – water cool – separate tankage
(Function tested by TCM – Offshore 2nd qtr. 2013)
- 7,500 ft 1-1/4” drill line 6 x 19 EIPS IWRC RPL
- Crown-O-Matic toggle valve crown saver
II - Trailer
- Model ES 9660 with Mast Crown and Standpipe
- (5) axle, triple steel board, balanced suspension. (2) Air lift (3) Spring,
12 x 20 double tires
- OAL 50’ L x 10’10” W x 14’ H with mast on
- Back overhang 5’4”
- Axle spacing 4’6”
- (5) x 26,000 lbs. axles
III - Substructure- Model ZZ225 rated at 500,000 lbs – pull test 580K
- Floor height – 19’ 8-1/2” (scoped up)
- 11’6” W x 30’ L x 10’3”H (scoped down)
- Under rotary 17’ 6”
- Clear area under beams – 15.7 feet
- Mechanical raise with adjustments for uneven locations
- Floor – 24 feet x 20 feet complete with 2 walkways, and trailer
walkway ladder. All built new 2 qtr. 2013
Subscribe to:
Posts (Atom)